Pentru bugetele reduse si casele cu incaperi foarte mici, mobila multifunctionala inseamna valul viitorului.

O piesa de mobilier multifunctionala se transforma in 2, 3, 4 sau chiar 5 obiecte traditionale de mobila dintr-o casa.

Ideea este foarte buna, mai ales daca nu dispui de prea mult spatiu, dar si daca nu vrei sa te incarci cu prea multe lucruri pe care le poti regasi intr-unul singur.

Pe langa toate acestea, sigur iti doresti un interior care sa-ti satisfaca mai multe nevoi de confort, relaxare si nu numai, toate intr-un spatiu restrans. Si daca traiesti intr-o casa mai mare, ideea unei piese de mobilier care se poate transforma in mai multe, nu are cum sa nu fie binevenita.

In galerie vei regasi piese de mobilier multifunctionale. Pe care ti-ar placea sa o ai la tine in casa?

1. Un set de masa, suport si scaun. Sursa foto: www.trendhunter.com

2. Un obiect foarte interesant, pe care il poti folosi pentru copilul tau, de cand e mic pana se face mare. Obiectul poate fi patut, ladita, biblioteca sau set de scaun si birou. Sursa foto: www.trendhunter.com

3. Piesele din imagine se pot desparti si uni si pot lua diferite forme. Poate fi un pat mare, mai multe scaune sau masa de scris. Sursa: trendhunter.com

4. 8 piese de mobilier multifunctionale

5. Piesa de mobilier care se transforma in masa, spatiu de depozitare, fotoliu si mai multi tabureti. Sursa: trendhunter.com

6.

7.

8. Atat piesa de mobilier sub forma de canapea, cat si obiect de facut sport. Sursa: trendhunter.com

Ce poatre fi mai bine decat sa stai la un foc de tabara cu o bere in mana? Pescuitul 🙂

Iata un proiect indraznet cu leagane.

“It took me just about 3 days, first day was digging the holes and setting the uprights. All the wood is pressure treated 6×6’s. Next day was finishing building it. and the 3’rd was spreading the gravel and setting the fire pit and staining the pressure treated. I bought the swings offline from Louisana Cypress Swings and Things and had to wait a week or more for them to be shipped.

I din’t have any building instructions to go by, pretty much just winged it. I layed out the hexagon in the yard so that center for the uprights for each bay was 7′ apart because I knew I wanted to get 5′ swings. I had 14′ from each upright to the upright opposite of it. I’m not sure what the angles were, I just took two pieces of scrap and layed them up there and messed around cutting a few until I got the angle right. We got all the top pieces set up there before lagging them all in. Left one bay swingless so that I could carry firewood in.

I got 6x6x10’s for the uprights and they are sacreeted almost 3 feet in the ground. I guess its a little over 7 feet to the bottom of the 6x6x8’s on top.

Materials I used were
6- Bags of Sacreete (or Quickcreete – whatever you call it) one for each upright.
6- 6x6x10’s (for the uprights)
6- 6x6x8’s for the top sections
6- 2x6x8’s for the stabilizers that go kitty corner on top of 6×6’s (for strength)
24- 3/8’s x 8″ lags for laggin the top horizontal pieces to the uprights (countersunk)
24- 4″ Deck screws for screwing the top pieces together horizontally before lagging them.
24 – 3″ Deck screws for screwing the top 2×6 stabilizers to the 6×6’s
10- 3/8×8” eyebolts with nuts and washers for hanging the swings

Hope this helps with anyone that’s looking to give it a shot. Thanks for all the compliments.
Much appreciated.
Dave   “

Anthony Howe este un sculptor care foloseste energia eoliana pentru a da viata sculpturilor sale. El foloseste in principal otel inoxidabil care reactioneaza la cea mai mica pala de vant.